小弟初來乍到，分享幾個TGNET教程！

duchaoshandong

        小弟正在學習TGNET，基本操作還可以，但是實際應用不理想，不知道各位師兄師姐有沒有具體的應用實例，跟小弟分享一下，不勝感激！
         

牛先生

多謝啊  這個是做什么的呢

helloshigy

高級TGNET中文使用教材 目錄

第一章水力學基礎............................................................................................................................................. 4
一、輸氣管段流動過程的基本方程........................................................................................................4
二、 輸氣管段的基本流量公式..............................................................................................................5
三、流態的劃分與雷諾數........................................................................................................................5
四．TGNET 中使用的穩態基本流量公式.................................................................................................6
輸氣管段的水力摩阻系數................................................................................................................................. 6
一、光滑區...............................................................................................................................................6
二、混合摩擦區.......................................................................................................................................7
三、其他阻力系數公式（含阻力平方區）............................................................................................7
氣體狀態方程................................................................................................................................................... 10
一、氣體的狀態方程..............................................................................................................................10
二、真實氣體的狀態方程...................................................................................................................... 11
三、氣體狀態方程小結..........................................................................................................................13
溫度計算.................................................................................................................................................13
一、溫度計算選擇.................................................................................................................................13
二、總傳熱系數.....................................................................................................................................14
三、詳細傳熱計算.................................................................................................................................14
四、溫度計算比較.................................................................................................................................15
第二章 軟件概述............................................................................................................................................. 15
2.1 軟件的特點和主要用途...................................................................................................................15
2.2 軟件的人機界面...............................................................................................................................15
第三章使用軟件的準備工作............................................................................................................................ 19
3.1 建立管網模型文件...........................................................................................................................20
3.2 設置使用的單位制和單位...............................................................................................................24
3.3 設置模擬選項..................................................................................................................................25
3.4 合理選用摩阻公式和管道步長KNOT SPACE .....................................................................................27
3.5 合理選用狀態方程..........................................................................................................................28
3.6 打開溫度跟蹤和氣體屬性跟蹤......................................................................................................28
3.7 設定初始約束條件..........................................................................................................................29
3.8 保存管網模型文件...........................................................................................................................32
第四章穩態模擬的基本步驟............................................................................................................................ 33
4.1 輸入氣體參數..................................................................................................................................33
4.2 建立管網模型..................................................................................................................................35
4.3 管網模型的有效性檢查...................................................................................................................36
4.4 運行穩態模擬和查看計算結果.......................................................................................................37
第五章以批處理方式運行動態模擬的基本步驟............................................................................................ 41
5.1 建立動態腳本，添加必要的約束..................................................................................................... 41
5.2 指定需要的動態趨勢和報告的頻度................................................................................................. 45
5.3 運行動態模擬.................................................................................................................................... 46
5.4 查看動態模擬報告和趨勢報告......................................................................................................... 46
5.5 建立動態趨勢圖................................................................................................................................ 47
3
第六章交互（互動）式動態模擬.................................................................................................................... 48
6.1 啟動.................................................................................................................................................... 48
6.2 控制運行速度和數據刷新時間......................................................................................................... 48
6.3 選擇初始狀態.................................................................................................................................... 49
6.4 交互命令............................................................................................................................................ 49
6.5 退出命令............................................................................................................................................ 51
第七章 案例研究......................................................................................................................................... 53
1 不同參數如何影響計算流量..............................................................................................................53
2 已知數據DATA .....................................................................................................................................54
3、例題計算...........................................................................................................................................55
4、計算結果...........................................................................................................................................56
5、模擬結論SIMULATION CONCLUSION ........................................................................................................58
6 檢查錯誤.............................................................................................................................................59
7 簡單案例研究.....................................................................................................................................60
案例研究.......................................................................................................................................................... 61
一. 管道的儲氣能力案例研究..............................................................................................................61
二. 調峰分析案例研究。......................................................................................................................63
三. 氣源中斷、持續時間、及恢復過程案例分析..............................................................................68
四. 壓縮機停機及其后果分析案例研究..............................................................................................71
五. 縮機再啟動的時機和系統的恢復過程案例研究..........................................................................76
六. 泄漏分析案例研究..........................................................................................................................82
七. 儲氣、調峰和調壓時的溫度變化案例研究。..............................................................................87

helloshigy

TGNET中文使用手冊——氣體管線瞬態和穩態模擬計算軟件PIPELINE STUDIO FOR GAS  TGNET

目錄

PIPELINE STUDIO培訓························································································ 1

生產················································································································· 1

用戶················································································································· 1

培訓················································································································· 1

1    Lab 1  PIPELINE STUDIO介紹························································································ 3

1.1      起動PIPELINE STUDIO····································································································· 3

1.2      使用PIPELINE STUDIO····································································································· 3

1.3      打開和關閉組態文件·········································································································· 4

1.4      保存組態文件··················································································································· 5

1.5      輸入關鍵字文件················································································································ 6

1.6      輸入關鍵詞文件················································································································ 6

1.7      輸出組態文件作為關鍵詞文件······························································································ 7

1.8      退出PIPELINE STUDIO····································································································· 8

1.9      練習1A:·························································································································· 8

1.10    練習1B:·························································································································· 8

1.11    增加網絡元件或管線·········································································································· 8

1.12    建立管網······················································································································· 10

1.13    管網對象······················································································································· 11

1.14    使用Grid和Snap··········································································································· 12

1.15    縮放和平拉···················································································································· 12

1.16    對象尺寸······················································································································· 13

1.17    翻轉和旋轉對象·············································································································· 13

1.18    旋轉對象······················································································································· 13

1.19    移動對象······················································································································· 13

1.20    斷開節點······················································································································· 14

1.21    練習 1C:······················································································································· 14

1.22    有關圖象節點················································································································· 17

1.23    用圖象節點畫圖·············································································································· 17

1.24    運行靜態仿真················································································································· 18

1.25    運行瞬態仿真················································································································· 18

1.26    圖形輸出和書簽設定········································································································ 19

1.27    其它有關提示：·············································································································· 21

1.28    經常提到的問題·············································································································· 22

2    Lab 2  PIPELINE STUDIO輸入······················································································ 24

2.1      用網絡視圖進行工作········································································································ 24

2.2      用節點工作···················································································································· 24

2.3      設定節點粘接距離··········································································································· 25

2.4      編輯對象屬性················································································································· 25

2.5      練習 2A:······················································································································· 26

2.6      工作網絡評估················································································································· 26

2.7      練習 2B:······················································································································· 27

2.8      表格視圖······················································································································· 27

2.9      使用新表格向?qū)?/font>·············································································································· 31

2.10    利用插入頁面向?qū)?/font>··········································································································· 32

2.11    關于表格視圖使用Find 和 Replace 以及 Set To 和 Set To Initial··········································· 32

2.12    練習 2C:······················································································································· 34

2.13    用流體工作···················································································································· 34

2.14    以用戶屬性工作·············································································································· 35

2.15    用屬性視圖···················································································································· 37

2.16    練習2D:························································································································ 37

2.17    用單位工作···················································································································· 37

2.18    利用單位管理者·············································································································· 39

2.19    練習 2E:······················································································································· 39

2.20    有關屬性視圖················································································································· 40

2.21    用屬性視圖工作·············································································································· 40

2.22    有關提示：···················································································································· 42

2.23    經常提到的問題：··········································································································· 43

3     Lab 3  PIPELINE STUDIO的附加特點············································································ 45

3.1      使用PIPELINE STUDIO的幫助························································································· 45

3.2      鎖住幫助主題················································································································· 46

3.3      顯示幫助主題用作對話、窗口或視圖··················································································· 46

3.4      導航幫助系統················································································································· 46

3.5      打印幫助主題················································································································· 46

3.6      設定幫助選項················································································································· 47

3.7      用報表和輸出工作··········································································································· 47

3.8      發送 e-mail··················································································································· 48

3.9      技術支持······················································································································· 48

3.10    練習 3A:······················································································································· 49

3.11    插入對象······················································································································· 49

3.12    作為背景對象設定對象····································································································· 50

3.13    移動舊的輸出文件··········································································································· 51

3.14    利用 File Maintenance 公用程序······················································································· 51

3.15    工具欄·························································································································· 51

3.16    練習3B:························································································································ 54

3.17    用仿真工作···················································································································· 54

3.18    設定先進的仿真控制········································································································ 54

3.19    設定選項······················································································································· 55

3.20    使用舊的文件管理··········································································································· 55

3.21    練習 3C:······················································································································· 56

3.22    相關提示：···················································································································· 56

3.23    常見問答：···················································································································· 57

4    Lab4 PIPELINE STUDIO輸出························································································ 59

4.1      設定墻紙背景················································································································· 59

4.2      設定網絡視圖性質··········································································································· 59

4.3      用顏色工作···················································································································· 60

4.4      設定顏色圖案················································································································· 61

4.5      練習4A:························································································································ 61

4.6      設定視圖選項················································································································· 62

4.7      顯示/隱含狀態欄和工具欄·································································································· 62

4.8      使用Find用于網絡視圖···································································································· 63

4.9      用數據塊工作················································································································· 64

4.10    使用數據塊向?qū)?/font>·············································································································· 65

4.11    編輯數據塊···················································································································· 65

4.12    移動數據塊···················································································································· 66

4.13    刪除數據塊···················································································································· 66

4.14    用格式化畫筆················································································································· 67

4.15    練習4B:························································································································ 68

4.16    瞬態考慮······················································································································· 68

4.17    建立瞬態方案················································································································· 69

4.18    用趨勢圖工作················································································································· 70

4.19    重新起動瞬態方案··········································································································· 70

4.20    運行仿真器里多個組態文件······························································································· 70

4.21    練習 4C:······················································································································· 71

4.22    用仿真工作···················································································································· 71

4.23    使用外形輪廓向?qū)?/font>··········································································································· 73

4.24    利用外形輪廓················································································································· 75

4.25    練習4D:························································································································ 75

4.26    打印網絡視圖················································································································· 75

4.27    打印表格視圖················································································································· 76

4.28    工作報表······················································································································· 77

4.29    練習 4E:······················································································································· 78

4.30    有關提示：···················································································································· 80

5       Lab 5 PIPELINE STUDIO仿真原理··············································································· 81

5.1      流量方程······················································································································· 81

5.2      一般  方程:····················································································································· 81

5.3      AGA方程······················································································································ 81

5.4      Colebrook-White 方程····································································································· 82

5.5      Panhandle A:················································································································· 83

5.6      Panhandle B:················································································································· 83

5.7      Weymouth:···················································································································· 84

5.8      氣體流體······················································································································· 84

5.9      流體質量一般相關··········································································································· 85

5.10    氣體可壓縮性和密度一般相關··························································································· 85

5.11    BWRS 狀態方程用于可壓縮性氣體····················································································· 85

5.12    氣體的重度和熱值··········································································································· 86

5.13    氣體比重和熱值的BWRS 狀態方程···················································································· 86

5.14    氣體熱容（一般相關）····································································································· 86

5.15    流體質量BWRS 狀態方程································································································ 86

5.16    在TGNET 里的溫度跟蹤和熱傳遞······················································································ 86

5.17    練習 5A:······················································································································· 98

5.18    仿真選項······················································································································· 98

5.19    練習 5B:······················································································································ 105

5.20    有關性質跟蹤················································································································ 105

5.21    文件命名貫例················································································································ 106

5.22    壓縮機、驅動器曲線······································································································· 106

5.23    壓縮機組和站················································································································ 107

5.24    有關驅動器··················································································································· 107

5.25    用驅動器工作················································································································ 107

5.26    用壓縮機組工作············································································································· 108

5.27    用站工作······················································································································ 109

5.28    用特性曲線工作············································································································· 110

5.29    用往復式特性曲線標識符（CPIDs）工作 （往復式 CPID’s）················································ 111

5.30    氣缸工作······················································································································ 113

5.31    用驅動特性曲線標識符工作（DPIDs）工作········································································· 114

5.32    用透平特性曲線標識符（TPIDs）工作··············································································· 115

5.33    模型的一般提示和建立網絡······························································································ 116

PIPELINE STUDIO培訓

生產

歡迎來到PIPELINE STUDIO, ENERGYSOLUTIONS INTERNATIONAL 公司具有現代藝術圖形環境可為氣體和液體管網進行穩態和瞬態水力分析。

在PIPELINE STUDIO內眾多的仿真工具集成在一個圖形環境下，所以可以利用穩態和瞬態模型，在Windows里進行組態，執行和分析氣體和液體管網環節。

PIPELINE STUDIO是我們工業上證實氣體和液體仿真的最新版本，它們分別是TGNET 7.1 和 TLNET 7.2。

管網模型可以簡單也可以復雜。有各種標高外形和各種形式的設備。當大量數據進入程序的時候，可用代表管線和真實設備的符號，用熟悉的拖動和下拉技術建立網絡。且對有上下文相關的錯誤報告快速進入程序管網進行確認。

用戶

這個PIPELINE STUDIO培訓課程是個入門課程，給產品最初用戶或想通過PIPELINE STUDIO成為有生產能力的人而設置的。

PIPELINE STUDIO培訓課程的目的是給配管工程師、技術員或?qū)�業技術人員提供熟練技術，并熟悉產品。使得他們提高生產力和有效地使用產品。

培訓

PIPELINE STUDIO培訓提供實驗室型的環境，其意圖使培訓人員相互配合，高效率。目的保持學生的興趣和高度注意力。

你也許記得大學生或?qū)W院里化學課程是很凌亂的。在你不愉快時，經過學習有關的基礎概念理論以后，全景實驗或有時其他方式纏繞著你。PIPELINE STUDIO的培訓是有方法的有條有理的，使得用戶能夠從現有的實驗室和培訓有關的強有力的知識里獲得技能，講課、討論都與實驗相結合。

shamofeiou

感謝分享~~樓主好人啊。

bkqcycyqm

樓主發帖辛苦了。

tianshihuilang

好東西，頂頂頂

tianshihuilang

好東西，頂頂頂頂

xiaoxuexue

很好的東東哦，謝謝樓主

guoshaguo

好東西 頂下你